戻る

v2__guides

このウェブサイトに掲載されている商品は、コンフォートワークスによりデザイン及び製作されています。 全てのカバーとブランド用のテンプレートを一から製作しています。弊社の美しく実用的なファブリックは、社内で選出及びテストされており、ソファメーカーの標準的なテキスタイルとは異なります。
 

Ekenaset Slipcover Installation Guide

In the package, you will receive the slipcover set which comes in two pieces: 1 Backrest cover and 1 Seat cover
IKEA EKENASET armchair with Textured Weave Denim slipcover
Image: Visual representation of armchair slipcover guide, displaying one backrest cover and one seat cover
IKEA EKENASET armchair with Textured Weave Denim slipcover
Image: Visual representation of armchair slipcover guide, displaying one backrest cover and one seat cover

Installation Steps

SEAT COVER

Image: Visual representation of armchair slipcover guide, displaying seat cover on the seat with two long straps
1. Slip the seat cover on the seat, with the two long straps coming toward the back of the chair.
Image: Armchair slipcover guide - Seat cover correctly fitted at the front (highlighted in red circle)
2. Ensure that the front bottom part (red circle) has been correctly fitted to the front part of the seat.
Image: Armchair slipcover guide - tucking the excess fabric between intersection of backrest and seat cushions
3. Bring the straps to the side of the seat, and tuck the excess fabric between the intersection of the backrest and seat cushions.
Image: Visual representation of armchair slipcover guide, displaying seat cover on the seat with two long straps
1. Slip the seat cover on the seat, with the two long straps coming toward the back of the chair.
Image: Armchair slipcover guide - Seat cover correctly fitted at the front (highlighted in red circle)
2. Ensure that the front bottom part (red circle) has been correctly fitted to the front part of the seat.
Image: Armchair slipcover guide - tucking the excess fabric between intersection of backrest and seat cushions
3. Bring the straps to the side of the seat, and tuck the excess fabric between the intersection of the backrest and seat cushions.
4. Connect the two straps to each other around the backrest, and secure in place by adhering the velcro ends to each other.
GIF tutorial: Demonstrating the placement of the two straps goes around the backrest
Image: Armchair slipcover guide - shows the Velcro placement on the strap
Image: Armchair slipcover guide - visual of both straps Velcro connect to each other
GIF tutorial: Demonstrating the placement of the two straps goes around the backrest
Image: Armchair slipcover guide - shows the Velcro placement on the strap
Image: Armchair slipcover guide - visual of both straps Velcro connect to each other

BACKREST COVER

Image: Armchair slipcover guide with directional cues in bluebox and arrow for both backrest and seat cover
1. Slip the backrest cover on with the side tabs facing toward the back of the chair.
GIF tutorial: Demonstrating how the backrest cover fitting should go
2. Pull the backrest cover down, ensuring that the gap on the sides is fitted correctly around the inner screw found on the wooden frame of the chair’s legs. Make sure that the side tab is out of the way when pulling the backrest cover down.
GIF tutorial: Demonstrating how the backrest cover fitting should go and the excess needs to be tucked into the intersection
3. A little elbow grease is needed to ensure the backrest cover comes down all the way! Once the entire backrest cover has been fitted on, the ends will need to be tucked into the intersection between the seat and the backrest cushion.
Image: Armchair slipcover guide with directional cues in bluebox and arrow for both backrest and seat cover
1. Slip the backrest cover on with the side tabs facing toward the back of the chair.
GIF tutorial: Demonstrating how the backrest cover fitting should go
2. Pull the backrest cover down, ensuring that the gap on the sides is fitted correctly around the inner screw found on the wooden frame of the chair’s legs. Make sure that the side tab is out of the way when pulling the backrest cover down.
GIF tutorial: Demonstrating how the backrest cover fitting should go and the excess needs to be tucked into the intersection
3. A little elbow grease is needed to ensure the backrest cover comes down all the way! Once the entire backrest cover has been fitted on, the ends will need to be tucked into the intersection between the seat and the backrest cushion.
GIF tutorial: Demonstrating how the backrest side tab velcro connect to the seat cover strap velcro
4. Then, secure the backrest side tab velcro to the velcro on the straps from the seat cover. Now, bring the side tabs toward the back of the backrest. Bring down the back cover over the straps and secure the side tabs under it. The velcros will adhere and hold them in place.
Image: Armchair slipcover guide, blue arrow indicating where to secure the new cover velcro at the bottom of the chair
5. Lastly, bring the back cover down to the bottom of the chair, unzip the existing cover and fold it to allow the new cover to adhere to the velcro at the bottom of the chair (blue arrow). Secure, and you’re done.
GIF tutorial: Demonstrating how the backrest side tab velcro connect to the seat cover strap velcro
4. Then, secure the backrest side tab velcro to the velcro on the straps from the seat cover. Now, bring the side tabs toward the back of the backrest. Bring down the back cover over the straps and secure the side tabs under it. The velcros will adhere and hold them in place.
Image: Armchair slipcover guide, blue arrow indicating where to secure the new cover velcro at the bottom of the chair
5. Lastly, bring the back cover down to the bottom of the chair, unzip the existing cover and fold it to allow the new cover to adhere to the velcro at the bottom of the chair (blue arrow). Secure, and you’re done.